...reset remote key after disconnecting car battery? plug back out the battery and connect it back, start the engine, press the remote button twice, then take out keys and WOW!!! its working dealer only ...
...REMOTE BATTERIES! HOW DO I DISCONNECT THE ALARM SYSTEM COMPLETELY OR AT LEAST RESET IT? THE CAR HAS BEEN STANDING FOR A WEEK AS I CAN'T START IT. PLEASE HELP! I'M FEDUP WITH THIS ALARM SYSTEM. THANX ...
...Help please. hi, you may want to check the car remote battery for they may be faulty, if it seems fine then try looking for the reset button of the car alarm system. hope this helps, have a nice ...
...reset the system, changed the remote battery and it is til having the starting on its own problem then i would enure that it is installed properly and maybe even just bringing it in as the automtic ...
have tried locking and unlocking the car with the remote while battery connected and that DOESN'T WORK. Any suggestions? After reconnecting the battery press the FOB 5 times that should reset the alar
...reset it? Check the car battery there is a battery in the remote as well but its to new to need to be replaced and so is the battery in the car It sounds most likely like there is a bad connection on ...
Question about 1993 Mark VIII
...battery was dead so i purchased new battery and installed connected battery terminals alarm went off and cant turn alarm off with key fob remote do i have to reset something? Key fob battery
Question about 2011 Corolla LE
remote. And the key remote makes no difference ? If the remote doesn't reset it. Have battery hooked up, hood shut and all doors then lock and unlock door with the key. Works on a few different models
Question about 2011 Corolla LE
...remote battery as well. Car sat for 5 months. Some car buttons do not work with new battery. Antilock sign permanently on screen Disconnect the battery for at least 2 hours. Hold the positive and ...
Question about 2011 Corolla LE
Reset the system: Try resetting the remote start system by disconnecting the battery for a few minutes, then reconnecting it. This may help reset the system and resolve any issues that were causing it
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions