Questions & Answers for: reset pulsar watch hands

...Pulsar PF8036 is part of the stopwatch feature. The upper button starts/stops the stopwatch feature, and the lower button operates the lap/reset function. Why they made the larger hand work only with ...

Pulsar (Seiko) Watch Changes Date at different time. Hey, I accidentally changed the date between 9pm-3am prior to realizing I wasn't supposed to according to the manual. Now the date changes about 45

...of the stopwatch does work. The problem is that it doesn't return to the 12 o'clock position when I reset the stopwatch. Try this: pull out crown to the first click, then push and hold button at 2 ...

pulsar chrono model pf 3347 WHEN CRONOGRAPH IS RESET SECOND HAND DOES NOT STOP AT 12 OCLOCK POSITION Go here and follow the instructions. The link is a pdf of the manual.

the minute hand on the stopwatch doesn't reset Follow this link and choose OPRATIONAL GUIDE; http://www.pulsarwatches.com/home2.asp#FAQ Rate, please.

...reset to zero after use. It keeps an accourate count of the minutes but starts from 9 minutes. How do I get it to start at zero? David Do as follows: 1) pull out crown and set the hour and minute ...

...reset ,, and try to adjust it again by pressing top & bottom button hope that will help if not and you are in chicago bring it to us at Amfix Jewelry & Watch Repair 203 N. LaSalle St Chicago, ...

...watch is not actually a 'sweep' second hand, as on other watches. This is a timer dial. ["Stopwatch 1/5 Second Hand"] To start/stop this, use the top button (Button "A"). To reset this dial to 12 ...

...reset. The timer (stop watch) on my Pulsar Chronograph watch does not line up with the 12 when it is reset. I think it was knocked off center with very high magnatism. Is there a way I can manually ...

...Pulsar YM92 movement, the instructions are as follows:

1. Pull the crown all the way to the time setting position.
2. Press and hold the Start/Stop pusher for 2 seconds. The stopwatch 1/20 ...