...Perform Service". Checked the book but it doesn't explain just that. Any ideas? Thanks. This is just a routine service reminder, it can be reset by pushing the step button until you see 0 miles to ...
...perform service light comes on with a chime signal. It goes off while driving. I have had service performed on the vehicle, even changed the interval timing, but it hasn't worked. The mechanics just ...
Question about 2001 Grand Cherokee
perform service." I thought this is set through the menu to how ever many miles you want to be reminded to change your oil. I've been changing the oil right on schedule and can't seem to get this
light is on that says perform maintainance light says perform mantainace on a 2004 jeep grand cherokee limited edition Press the step button until miles to service comes up. Then press and hold reset.
...perform a diagnostics test. I think it is around $95. It could be something simple as a fuse or reset needed. It could possibly be under warranty and not cost you anything but the $95. I hope this ...
Question about 2007 Grand Cherokee Overland
...reset service require lite on grand jeep cherooke 2007 Start the engine. Then press the C/T button . Then tab the the computers setup with the step button until you see 0 miles to service. After you ...
...Reset button both do not illuminate but the other buttons (Step and Menu) are illuminated. All other interior lights work fine. How do I fix this problem? You will get your solution and all info on ...
...reset: On a 1997 Jeep Grand Cherokee Laredo if the "Perform Service" light is in the middle of the dash Simply press the "SET" button until the display shows the "0 miles to service", Then hold the ...
1994 jeep grand cherokee 0 miles to service. perform service. how do I reset the screen? Usally you can turn key on engine off and push throttle pedal 3 times to the floor and it will reset.
Question about 2007 Grand Cherokee
Service Repair Manual 2005 2006 2007 2008 we've posted the 4 ways, 100s of times now. again/. 1: scan tool push reset. 2: pull the PCM memory fuse, IOD (name of fuse) 3: pull neg battery term for 5min
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions