Questions & Answers for: Chevrolet Colorado reset oil change indicator 2010

Ad

Question about 2006 Colorado

2 Answers

...OIL LIFE THEN RESET HOLD BUTTON UNTIL YOU HEAR THREE CHIMES SWITCH OFF IGN What we did is hold down the trip odometer until it reset to zero. After that the message should go away. At least that is ...

Ad

...reset the "Oil Change Warning Indication" on colorado Hi. I've recently changed the Oil/filter on my dad's 2006/2007 chevy colorado for the first time. Now how do I get the oil change warning ...

Ad

...is displayed. Once the alternating OIL LIFE and RESET message appears press and hold the stem until several beeps sound. this confirms that the oil life system has been reset. Turn the key to

...other problems. With the truck off, hold the trip reset button in, until the display reads "oil life", then hit it again. It will say "reset" then the message will go away next time you start it ...

Question about 2004 Colorado

1 Answer

reset change oil message? I just changed the oil in my truck and now the change oil message will not go off how do i reset it? hold gas pedal to the floor. turn key to run positon but do not turn over

reset change oil warning on dash... How to reset change oil warning on dash while change oil is flashing hold the reset stem on the cluster(where you would switch between odometer and trip) hold until

reset change oil light 2007 chevy colorado 4cyl. Turn the key to the on position a then press the gas pedal three times within 5 seconds,the oil life light should flash 5 times then go out,then the ...

...and release the stem until oil life message is displayed. Once the alternating oil life message and reset is displayed press and hold the stem until several beeps are heard. The light has been

Question about 2005 Colorado

2 Answers

RESET YOUR CHANGE OIL LIGHT.TURN IGNITION ON POSITION WITH ENGINE OFF.PRESS BUTTON ON BOTTOM OF SPEEDOMETER AND HOLD BUTTON UNTIL 3 CHIMES SOUND.INDICATING RESETTING IS COMPLETE.THEN TURN OFF IGNITION

...check engine reset bat indicator to reset the oil change light on, turn key on, press the accell pedal to the floor three times. which fuel vapor sensor are you refering to? the tank pressure

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...