Questions & Answers for: reset kenmore 400 dryer

Question about 84072 Electric Dryer

1 Answer

...reset but end up with the same result. When I restart the dryer there is an initial two dash display but that eventually goes away. Hello smith.. The control board of the dryer has gone bad.. You may ...

Ad

Question about Elite 45986 Front Load Washer

2 Answers

Kenmore and Whirlpool models, but they are the most common. Chances are, if you have a Control Lock feature, the instructions will be printed on the front panel adjacent to the button that is required

Ad

Question about Elite 45986 Front Load Washer

1 Answer

...Kenmore 400 Electric Dryer two days old. The drum turns but no heat. I hooked the three prone plug from the old dryer on the new dryer the same way it came off the old one. I hooked the old vent hose ...

Question about 73952 Gas Dryer

1 Answer

...Kenmore 400 series top loading electric dryer that just stopped working right in the middle of a load of clothes. It was working just fine and then it just stopped. Now it will not turn on at all. ...

Question about 400 6942 Dryer

1 Answer

...dryer won't heat it is the thermostat/thermal fuse that is bad, you can test it with a voltmeter before replacing. This fuse is located inside the rear panel and it cannot be reset. Hope this will ...

Question about 400 6942 Dryer

1 Answer

dryer does nothing when u push start button nohumming or turning is there a reset switch and if there is where is location First, make sure that the breakers are not tripped. If the breakers are okay,

Dryer has power to it but will not turn on Hi I believe that everything else is fine rather it is the the thermal fuse that is located inside the rear panel to the exhaust duct that is bad and should ...

Question about 400 6942 Dryer

1 Answer

...reset the electrical box so that the dryer will start again. Is there a quick way to change the temperature? I would appreciate your advise. Thank you. Hi, The cycling or operating thermostatis often ...

Question about 400 6942 Dryer

1 Answer

kenmore 400 series gas dryer will not start it just makes a click sound its a couple of years old Hello & Welcome to FixYa If you have already cleaned the vent then the problem is with the Thermal

Question about 400 6942 Dryer

1 Answer

...dryer Hello & Welcome to FixYa If you have already cleaned the vent then the problem is with the Thermal fuse. When the thermal fuse goes bad it cannot be reset and replacing it is recommended ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...