Questions & Answers for: reset check engine light subaru

reset the computer but I still get the check engine light coming on and off with the same diagnostic code. It will stay on for a short while or a few days and then stay off for days or weeks at a time

Ad

...reset the check engine light either with a scan tool, hit clear codes, or u can just disconnect the battery, the scanner clearing method is preferred as disconnecting the battery can cause temporary ...

Ad

...check light will reset. If the problem is still present, it will either stay or come back on. Our Su has done this a couple of times and with the scanner we have on hand, there was never any ...

Question about 1997 Legacy

1 Answer

reset the ''check engine'' light on my 1997 Subaru Legacy Outback wagon? the check engine light comes on if there is a problem with thecomputer system related to the emmision, when this is is repaired

...check engine light flashes and scan tool says cylinders 1 and 4 missfire. Reset the code and drive for a while and the same thing happens, any ideas? check plugs, wires, etc. check all ignition ...

...Check Engine Light comes on. ( Resets by unhooking battery) The check engine light has come on, and gone back off by itself though... Changed air filter, and fuel filter already. its probably the ...

...on check engine light stays on even after changing plugs computer may need to be reset with scan tool or maybe take neg.battery terminal or sometimes it will take a few good trips to reset

...check engine light is on and cruise control light is blinking on 2006 outback xt. car has just over 80,000 miles and is running normally despite lights that have come on. after this mileage the ...

reset airbag light in subaru outback 2004 You will need to have a mechanic with a good scanner interface with your car to retrieve and clear the code. Unlike check engine soft faults, the light cannot

...check if the issues persist. **4. ECU (Engine Control Unit) Reset: If the engine control unit was replaced or modified, you may need to perform an ECU reset. This typically involves disconnecting the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...