...button. When you reset iPod all your music and files are saved, but some customized settings may be lost. Date and time is preserved (unless the iPod reset itself because it had no power and then was ...
...reset it according to the manual, then you could have a stuck button switch. these buttons sometimes breaks and got stuck in the close position. test each one and observe if there is a clicking feel ...
Question about Inc. EJ500C Digital Wall Switch Timer - Self-Adjusting Feature
Reset button seems to be stuck Help EJ500 has 1 year warranty. The reset button sits naturally lower than other buttons. The manual shows troubleshooting. http://waterheatertimer.org/Intermatic-ej500c
...set display. 4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date. Hope it helps. Thank you for using
...reset steps are. Also, many timers you push the + button to go up through the numbers, and push the - button to go down through the numbers > try both buttons since one may be made for individual ...
Question about Inc. ST01C Digital In-Wall Timer
reset button is stuck and won't work A stuck reset switch keeps the timer in a rest mode so that nothing else will function. Try to operate the switch so as to free it. Then reprogram the timer if you
Question about Inc. ST01C Digital In-Wall Timer
...reset button for two seconds. Release Reset button, but keep holding ON-OFF button until display flashes INIT. Then release ON-OFF button and 12:00 displays. Following page has easy to follow ...
...reset timer before programming. Press setup button twice to begin programming. Check programming for conflicts and overlaps that will cause timer not to function as expected. For example selecting ...
reset button with paper clip for a few seconds. 88:88-88 will flash on screen momentarily, and then 12:00 am will display. Timer is ready for programming. If 88:88-88 does not roll over into the 12:00
Question about Westek Weekly Digital Timer, White
...RESET BUTTON WITH A PIN, NOW IT IS STUCK IN THE DEFAULT SETTING, HOW DO I FIX THIS Good boy. Resetting timer is always first step for restoring functionality of timer. Try resetting again. This will ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions