Questions & Answers for: replacing ups thermal printer

Question about DPP-FP50 Thermal Photo Printer

1 Answer

...printer for the first time and everytime i print a photo i have a white line through the middle of the photo. How can i stop this thanks falsify. you may have a faulty Thermal element, sounds like a ...

Ad

Question about CBM 1000 thermal Printer

2 Answers

...thermal printer the blade stops halfway though paper and quits, error message after. replace cutter assy. Part # Acc-230kit or send in for service. Agson - 856-751-9048 Ideally blow out with ...

Ad

Question about DMX-I-4212 Label Printer

1 Answer

...a difference. What else can I try? The thermal print head is damaged. You can try to clean it with a thermal printer head cleaner. That will only help if it is just clogged up with thermal print

Question about UP DR100 Thermal Photo Printer

1 Answer

Prints have a thin white line across all the images printed. Everything else works and prints are ok outside of the thin white line running horizontal across the 5x7 prints. Thermal head ? generates ...

Question about PSC 1350 All-In-One Thermal Printer

1 Answer

printer will not take up paper Clean or replace the rubber rollers,inside the back of paper transport area of the printer.You have to open up the printer to reach those pinch rollers.

Question about PSC 1350 All-In-One Thermal Printer

1 Answer

thermal printer. If this is so, there is no ink to replace. One simply buys a roll of thermal printer paper from your office supply store, or order it online. A search for 8.5 inch thermal paper turns

Question about P-91W Printer

1 Answer

thermal head" heats-up the ink and the paper, in order to "melt" the ink into the paper, and thus "fix" it. When it fails to produce heat, all the printed pages will have ink that can be smudged, when

...replacing the ribbon to begin a new print job. The ribbon now seems to stick to the paper, almost as if the rewind motor cannot pull up the slck. check that you are in thermal transfer mode in the ...

...replacing? I don't have any manuals or anything the printers are hooked up locally using a parallel cord and using ribbon, not thermal I think parallel port issues. Assuming your fastest ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66947 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...