Questions & Answers for: replacing tensioner pulley hyundai accent

...Hyundai 2002 1.6L DOHC have a timing belt or chain? If it's a chain, does it need to be replaced? If you have an Accent which I believe that you do, it has a belt which needs to be changed every ...

Hyundai Accent and I think some parts are missing. I have a place for two belts on my crank pulley. The inside pulley I am running my water pump and my alt. The outside crank pulley line up with the a

...pulley. Rotate the drive belt tensioner clockwise. Install the drive belt to the alternator. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys. ...

pulley that holds both the power steering belt and the alternator belt does not seem to allow enough room for the P/S belt to come off. Do I have to remove the alternator to make this replacement? Yes

...hyundai accent. the belt is on the power steering pulley and the water pump pulley The power steering pump has an adjustment for tension. You need to be able to swing the pump inwards to loosen the ...

...at your pictures as to how the belt was originally installed.You'll need to move that tensioner enough to replace the belt.After replacing the belt make sure it's on 100% before starting the

pulley,12 o'clock and 3 o'clock..which is used for TDC. i need info on finding TDC and setting timing. i thouhg i had it set, but when trying to start it, it just turns the motor..doesnt fire. hi from

...belt tensioner, the bearing either needs to be lubricated or replaced. depending on the miles on you're car you might think about replacing the serpentine belt also, to avoid problems down the

...tensioner pulley toward the coolant pump and temporarily secure it .Remove the timing belt Remove the camshaft from the camshaft sprocket Remove the crankshaft sprocket and flange. Remove the timing ...

...hyundai accent producing loud squeaks only at start up especially in the cold I had a bad power steering belt on a 2001, same issue. The problem is that the after market belts don't have enough ...