...Crankshaft Position Sensor wire harness. The 4 Cylinder is quite different. You not only change the timing belt, but also the countershaft (balance) belt, which is behind the crank position sensor ...
Crankshaft position sensor. Outside the where there code was checked the car did the same thing it just didn't take that long, it started up after one turn off of the ignition. Would that sensor cause
crankshaft sensor on 2001 sonata V6 Disconnect the battery ground (negative) cable to prevent accidental shorts that could damage the electronic control module. Find the crankshaft position sensor. It
...crankshaft position sensor off and how could i out it back as same with the timebelt? And do we have to left the enegin up so we could all the work. Hi, OK, first of all, has the car started back up ...
...and has not started since. i have replace the fuel pump crankshaft sensor and timing belts and the car still wont start. any ideals check cam SHAFT SENSOR/FUSE /CHECK WITH CODE SCANNER FOR FAULT ...
...sensor. The crankshaft position sensor is located next to the flywheel/torque converter. The computer is rarely the problem unless there was a short that caused undue current to flow. Testing ...
2005 hyund sonata v6 how to replace crankshaft sensor crankshaft sensor change you have to take off crankshaft pulley.
Question about 2001 Sonata
...of the engine, under the air boxes and ductiing. Signals from the crankshaft position sensor and camshaft position sensor(s) are what tell the ECM to fire the spark plugs and fire the fuel
...crankshaft position sensor and still no fire to engine..... Originally thought it had to do with MAF when was cleaning the MAF something SPARKED and it stopped turning over period where before it ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
