Questions & Answers for: replacing clutch pedal pin 99

...clutch in 1996 2wd GMC Sonoma 5 Speed Standard 2 bolts under the dash and take the clip off from the inside holding. The shaft to the pedal and the line from the outside it comes with a new pin if u ...

Ad

...clutch pedal has no throw it does not fully engage the clutch. Does the system need to be bled until the pedal completely builds up? Yes, get a pro-bleeder. They are around $ 75-$90 but well worth

Ad

...clutch pedal it goes straight to the floor but the fluid level is still on full and the fluid has some black looking gunk in it? please help Do a complete manual trans overhaul.Buy a kit from any ...

clutch pedal won't move I backed up my truck to park and I heard alittle grinding, parked fine. After that the clutch pedal will not go down, like it's stuck. I can move the shifter around

How do you adjust the clutch position pedal on a 99 gmc sonoma if you have this system it is not adjustable the cylinder might leak inside bell housing or clutch is wear down hope it helps

Question about 1998 Sonoma

1 Answer

...the cluch pedal the gromet holding clutch piston the pedal was worn an could not shift I replaced the part auto zone or one of those place carry it as an after market part...not sure if this will ...

...clutch has went out. it fills like i have a pedal but it ant goin into gear iv got under the truck an looked thru holes in bell housing tryin to see if te clutch was movi dont understand why the ...

Question about 1999 Sonoma

1 Answer

...MY CLUTCH IS WAY TO HARD WHEN I TRY IN PUT IT TO 1ST GEAR. CLUTCH PEDAL IS VERY LOOSE ASWELL.. WATS THE PROBLEM? CK BUSHINGS ON CLUTCH PEDAL, WORN OR MISSING BUSHINGS WILL CAUSE LOOSENES AND ...

99 gmc sonoma 5 speed manual transmission clutch will not release clutch will not disengage is your clutch reservoir low or lousing fluid or it may need replacement.are any arms bent or damaged,

...clutch pedal is going all the way to the floor..how do i adjust the clutch pedal..please help me Bleed or replace the slave cylinder. Make sure if there is enough brake fluid or if the fluid id not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...