Questions & Answers for: replacing brake light switch 08

...Brake lights do not light up when you push the brake down. The brake strip at the top works. Thought it was the brake switch but every I have spoken to says the brake strip and the brakes are on the ...

Brake lights don't work on 2006 trailblazer 2006 trailblazer - brake lights won't work check the little switch behind the brake pedal, known as a brake switch

...brake light switch went out what would make it go out this is urgent This is a wear item. well if what you mean by gone out the brake lights are on and not turning off then there is a rubber plunger ...

...brake light switch sensor on the brake pedal? Both sides of brake lights out. I replaced the bulbs for the brake lights and also replaced the switch board panel for the brake light. Any suggestions? ...

brake light also flew off. 2002 chevy trailblazer Check on the Driver side FRAMRAIL Behind the Wheel for a Poor GROUND , This is Common with this Vehicle Sound like The Stop lamp switch has gone bad.

...NEED ADJUSTING.IF ALL IS GOOD REPLACE BRAKE LIGHT SWITCH.TO ADJUST BRAKE SWITCH.THE BRAKE SWITCH IN BRACKET THE BRAKE SWITCH PLUNGER SHOULD TOUCH BRAKE PEDAL ARM BEFORE BRAKE LIGHTS WILL TURN

...brake switch. It is located right above the brake pedal in the cab. The pedal hits the switch and activates the brake lights. It is a round looking chrome cylinder usually. Change it and the brakes ...

...staying on, either the brake light switch is bad, or the brake pedal is too low due to the failure of the brake system. If the pedal feels normal, replace the switch that is under the dash. obd2 ...

...to look for brake lights ther is no fuse for that particular lights is ther a switch very close to the brake pedal that activate brake lights when you brake, and needs to be replaced, not to ...

...brake switch yet still not working. Now what? Blinkers, reverse lights and hazards working fine. replaced brake switch ??? If you don't know how to read a wiring diagram an use a volt meter to test ...