Questions & Answers for: replacement screws dryer cord

...screws on the dryer hookup and the red wire to the other brass or gold screw. The white wire will connect to the silver screw and the green wire will connect to the green screw or to a screw that is ...

...dryer itself there is usually a plate. One screw should hold this plate in place. Remove the screw and pull the plate out (it should only be held in by a couple of tabs). The cord is attached to the ...

...screws on the terminal block white goes on the neutral screw on the terminal block and green mounts on the dryer frame or cabinet I replaced a cord on a dryer several years ago. The replacement cord ...

...on the dryer? The screw holes should match up. Loosen the 1 screw on the cord clamp that keeps it tight. Maneuver the back plate until it lines up then re-tightened the screw for the cord

dryer! Now just replace the cord with the new one and refasten the screws. Make sure they are extremely tight where the cord connects to the terminal block. If you have a 3 prong cord with 3 wires the

screws on the cord clamp the clamp it to the back of the dryer just enough to release the cord, remove the four nuts / screws that are connecting the 4 wires from the cord to the terminal block and or

...dryer cord with a 4 prong cord, and I just want to make sure I'm doing it the right way. Does the green cord screw in above the other three? Hi, Here is a tip that will help you with changing your ...

...cord on my Dryer. I have placed the red, white an black wires in the right places but, I am having difficulty removing the green ground screw so that I can place the green ground wire under it. Can I ...

...dryer light comes and the timer ticks but nothing else. Any ideas? Thanks All domestic dryers have a 3 screw terminal block which you connect the cord to. 3 wire cords connect the outer wires to the ...

...screws into the ring lugs attached to the red and black wires on a replacement pigtail and the silver screw into the ring lug on the white wire. Drive the screws into the same slots from which you ...