Question about PowerFlush Sewage Ejector System S1101
it will not kick on until you hit the back of it Check the switch it is probably bad.
...pump. If your lucky it will be mounted in a control box. Small cylindrical item about 3 inches long. Prob around 10, 12 or 16 micro farad. Easy to change, 2 wires not essential which way round I have ...
Question about PowerFlush Sewage Ejector System S1101
motor hums, water leaking out from under toilet,will not grind If it is not tripping the GFCI Outlet or tripping a breaker, than more than likely the impeller is stuck. You will have to remove it to ...
Question about PowerFlush Sewage Ejector System S1101
toilet won't seal on star water systems toilet Toilet base is hitting the floor before the wax ring causing it not to seal Add two wax rings
Question about PowerFlush Sewage Ejector System S1101
Where to buy a s1101 replacement sewage pump Need to replace mine with a 1102RP pump Where replacement tank for 1101 power flush system
Question about PowerFlush Sewage Ejector System S1101
pump kicks on and runs for several minutes before it starts pumping water 2nd question,you only need 1,it is losing prime, or seals are bad
Question about PowerFlush Sewage Ejector System S1101
pump runs for several minutes before discharging water losing prime or level is not high enough
Question about PowerFlush Sewage Ejector System S1101
My Star Power Flush S1101 has thrown the GFCI. The GFCI will not re-set with pump plugged in. the your pump has shorted out and needs replaced or rebuilt
Question about PowerFlush Sewage Ejector System S1101
power flush system s1101 and it isn’t pumping the water out. We may need a new one, ours is 10 years old where can we get one and is there a better. One than what we now have fixya has no idea what is
Usually answered in minutes!
136 Questions
113 Questions
61 Questions