...serpentine belt to alternator - use 3/8" socket wrench directly in square hole on tensionser device - unwind it and unhook belt. Pic on engine helps when rethreading belt. 5)Undo all bolts ...
replaced on the front left wheel which was a little loose, but now the noise continues. "Loud humming" could describe many of the noises that your minivan may make. Let's start with the basics: do
...serpentine and alternator belt replaced and had the front passenger side drive shaft replaced after finding out it was busted. Any ideas on what this might be? The knock sensor is used to detect ...
Question about 1998 Ram
...replaced new a couple of years ago.. I am getting NO idiot lights, Any ideas as to what could be causing this? I had a similar problem on a 2004 Jeep Grand Cherokee V8 engine. Nothing seemed out of ...
Question about 1998 Ram
...replaced with a rebuilt, front wheel bearings, and power steering pump within past five months by reputable mechanics. Solved the shifting, squeaking, and hard turning issues, but this whine is ...
Question about 2008 Altima
...replaced. Have not checked fuses, or wiring not checked because I wouldn't know where to start and when we checked for motion with shudder present of the engine by putting in gear braking and revving ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions