Question about 1.5hp Pool Pump Motor Motor A O Smith Electric Pool Motor for 56j Frame Motors Ust1152
...pool pump duty 1.5 HP. It is making a very loud noise, do you think it needs replacement or should I look for something else? THIS IS LIKELY CAUSED BY SOMETHING IN IMPELLER TURN OFF POWER SEE IF YOU ...
Question about 1 Hp Super Pump Inground Swimming Pool Pump 115/230 Volts Sp2607x10
...pool pump (Hayward Super Pump), I see sparks and the circuit breaker gets tripped. What should I do? replace the pump or have it rewound at a motor shop it will take about a week. it is bad and you ...
Question about 2hp Whisperflo Pool Pump In - Ground
Turned on pump it sparked and stopped running breaker didn't trip. 99.9% Sure that motor is bad. Either replace with new(my choice) or have it rebuilt.
...or pool spa store--if motor pump check pump for debris and motor for lube if u can turn shaft or impeller oil motor and work it into bearings if still not turning possible need to replace motor ...
Question about 1 HP Sta-Rite Pump: 1.5" in/out, Center Discharge, 240V, w/Hair & Lint Pot
pool motor will not turn on there is power to the motor but it is just humming when turned on bad motor replace pump
...pool pump. The motor just hums when the switch is turned on. The pump is eight years old and I have had no problems until now. Remove the 4 fasteners that hold the pump head onto the motor and try to ...
...pool pump will not turn. I have removed the motor from the pump and have tried to turn the impeller but it fills froze up. Any ideas how to proceed before i purchase a replacement motor? bad armature ...
Question about SP3015EEAZ Super II Pump 15Horse Power
...pump or the motor i dont know what wrong with it i used another capacitor but it keeps giving out a cracking noise and sparks from the motor what is the cheapest way to fix it. There is no cheap fix ...
Question about 1.5hp Pool Pump Motor Motor A O Smith Electric Pool Motor for 56j Frame Motors Ust1152
...replaced the capacitor and also the start switch that I found bad. I marked the wires to replace them back to their original and had all the power off while I did the replacement. Is there any way to ...
pool pump won't turn on There is power at the breaker and power at and beyond the switch, but when I turn the pump on, I get nothing at all. No hum, no click, completely dead. bad motor replace ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions