Questions & Answers for: Kia replaced 2 plastic gears how to align gears

...2 sprokets to worry about the top two and crank gear, the crank gear has knocht on it and index on block ( towards back of gear visible from top) place on tdc mark ( top dead center), install the ...

timing belt marking i can't find correct marking for kia sportage 2001 belting The timing marks are just above the cams at the "twelve o'clock position" If necessary, align the timing marks. NOTE When

...align cam shaft gears at 12 oclock but when turning, the springs load and unload not stopping to align with the timing marks. heres a trick i use get two office style paper clips instal belt on one ...

...2.4 litre engine, they are 1 tooth off but will not stay when moved you need a special tool that holds them in place its a weird looking thing made out of plastic but it works ,try your local auto ...

...2- remove two platic retainers in the cover under the fog light hole, purpose of this is to provide enough room for the fender cover to move around. 3- cover underneath the left fender to access the ...

...be align It is critical that the the belt is tight between the cam gear and from the exhaust cam gear and crankshaft gear with the gears in these positions. Please let me know if you have

Replaced timing belt, now we have a surge, no power, just like the timing isn't advancing. We checked the fuel pressure and the vaccumn on it and double checked the timing on it, everything seems to ...

bought the full shafts- Replacing CV joints--pulling joint from transaxle- do they just pull out ? Will a gear go out of alignment in transaxle when pulled?--Thanks no you dont have to worrie about a ...

...2 cam gears, the inlet cam gear is running with the front main timing belt, but the exhaust cam gear has to be put back to right position this is where i mucked up? i position the front timing to top ...

...replaced a new starter Had replace the starter 2 times, when i turn the key, a grinding noise Did you replace the starter yourself or have a garage do it? It sounds like the starter gear is not ...