...the hood How to fix or replace the trunk hood latch ? The trunk key works, but the trunk hood doesn't lock when I close it. I had to reinstall the loose mounting hardware for the trunk upper
ball joint bolt smack the knuckle where the ball joint is to remove and flip the knuckle out of the way, use pry bar to pop halfshaft out of tranny. while installing new one make sure the splines line
Need to separate lower control arm ball joint from spindle assy, and then pull it out of the way for shaft to clear. Need a ball-joint removal tool, like tuning fork style, or proper puller/press tool
Ball Joint nut. I have bween trying to pop out the Ball joint from the cobtrol arm but it will not budge. I have tried a pickle fork, a pry bar, and a ball joint remover that I rented, but none worked
upper passenger side ball joint, are any special tools like a pickle fork needed? Just a ball joint seperator is needed. Sometimes if they are really stuck, a little bottle-jack helps to pop it apart.
...Ball joint was replaced at the dealership but it is still VERY sqeaky when I turn and/or go down a slight incline. I also noticed today as I was turning rather sharply into a parking space. shock ...
how to change my ball joints ON MOST OF THE HYUNDAI CARS THE UPPER BALL JOINTS REPLACED WITH THE UPPER CONTROL ARMS AND LOWER BALL JOINTS HAS TO BE PRESSED OUT OF THE STEERING KNUCKLE.
...replace the upper control arm Loosen the wheel nuts slightly. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheel and tire from front hub. CAUTION: Be ...
...arm ball joint,lower arm bush,yet I still ear dis noise like the ball joint is bad.any help to resolve this issue? did you change the upper arm ball joint. It has no load and if loose will be
How can I replace upper ball joints on 2004 Hyundai Sonata GLS You need to rent a ball joint press or use a special tool and a hammer to separate the joints.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions