Questions & Answers for: replace turn relay 1998 chevy

...turn the engine & subsequently power. So check the induction, belt tightness and finally the "Distributor"in the sequence as stated and you will be able to diagose which one of the above are ...

Ad

Question about 1998 Caravan

2 Answers

...turn on again unless I do that. so we thought it was the starter and replaced it and my car is still doing the same thing check all the fuses and the wire that goes to the starter and it is usually ...

Ad

Question about 1995 Firebird

1 Answer

...replace the ignition tumbler because I found the vats wires to tumbler broken. Had new key and code done at dealer.problem is nothing when key turned to start position. Checked power with testlight ...

Question about 1998 Lumina

1 Answer

...turn over. Tests show that there is at least some power in battery. A friend suggested that possibly the problem is the relay switch on the fuse box. What say you, and could you give me some helpful ...

Question about 1997 Camaro

1 Answer

...relay and still nothing. It clicks and doesn't pump It's that infamous "chip" in the key that becomes a nightmare to many. The security light may or may not start flashing. Sometimes it stays on ...

Question about 1997 Camaro

1 Answer

relay to no avail. I'm getting fuel pressure to the motor, but no fire. Also had that pesky faulty ignition switch happen and locked my key, wheel, and shifter into place until my battery got charged.

Question about 2000 Astro

3 Answers

TURN ON AND OFF FOR THE SAME NUMBER OF TIMES. CHECK FUEL PRESSURE SHOULD BE 58 - 64 PSI. IF YOU HAVE ZERO FUEL PRESSURE OR LOW FUEL PRESSURE.AND FUEL FILTER BEEN CHANGED YOU HAVE FUEL PUMP PROBLEMS.TO

...relay Let me give you a simple fix The biggest cause of fan burn out is voltage drop. On 80% of Chevy cars Lumina and the Malabu and even the Caramo I have had over 300 to come through here and this ...

turn the key to start position , you should see battery voltage . If you see battery voltage there is nothing wrong with the theft deterrent relay ! or the crank circuit. You need to do a voltage drop

...turn signals do not work. The hazards work, but can't see the lights on the dashboard. Also the horn does not work. I replaced all 4 bulbs, fuses are all good and flasher is good. Question edited for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...