Questions & Answers for: replace timing belt 1999 dodge

Question about 1999 Stratus

1 Answer

...timing belt so i replaced all belts, water pump, plugs, wires, cap, pcv valve. after all that it still shuts down on me at least 2 times in my 11 mile trip to and from work. so i replaced the fuel ...

Ad

...timing is off how do i fix it It also sounds like your valve cover gasket is leaking into your spark plugs, which would affect engine performance. Parts to replace the seals run about $20 and is ...

Ad

Question about 1999 Stratus

1 Answer

...replace is 3.8 hours. multiply this by the shop flat rate and this will give you a labor rate. call some local parts houses to find the price on the pump, dodge gets around 98dollars hope this helps, ...

...Timing belt was on the mark, crankshaft position sensor was showing RPM on the scanner, it was showing spark on the spark plugs, and had great compression and flooded cylinders. It was difficult. ...

...replace a timing belt in a 99 dodge stratus btween 200.00-300.00 Depends on the engine, call a garage and tell them what you have for an engine, and ask them if it is an interference engine. Did the ...

have fuel and spark but car still won't start. Replaced crankshaft sensor already, And put in new plugs timing belt broke??

...timing belt on 99 stratus, now it will not start, cranks but will not start...anything??? recheck to be certain it is aligned properly,. fortunately for you this is a non-interference engine, so you ...

Question about 1999 Stratus

1 Answer

...in and under the timing cover and the timing belt must be removed to replace it. It's not that much more work once the head is pulled but it is a little more complicated putting back

...REPLACE BATTERY CABLES SEE IF HELPS THE PROBLEM.TURN OFF RADIO BEFORE DISCONNECTING NEGATIVE BATTERY CABLE TO KEEP FROM LOCKING OUT THE RADIO.MOST OF THE TIME A BAD BATTERY GROUND CABLE OR EITHER ...

...timing belt tension on a 1999 dodge stratus The belt tensioner is not adjustable. To loosen a tensioner you would swivel the belt tensioner away from the belt with a long flex wrench ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...