Questions & Answers for: replace tail light bulb 1987

...tail lights were also out. I replaced the fuse and they worked for a couple of days and went out again. Now when I replace the fuse they come on for long enough to blow out. Dont really know what to ...

...Nissan Pathfinder and the tail/head lights do not work? Any ideas/suggestions?? Check the bulbs for burnt filaments. Take a multimeter and test your feeds and grounds at each socket. Possible ...

...tail light's 10A fuse burns when I turn on the lights. I checked the bulbs, they are OK. Can somebody tell me what else is connected to this fuse, causing the burn of the fuse? check all your lights, ...

...tail light is not working. I have replaced the bulbs, but the whole side is dead. So I went and checked the fuses,but realized if the fuse was blown, both tail lights would be out. Could this be an ...

...lights but no tail lights. Checked the fuses-they are ok. Hello,well you must change the bulbs,in this bulb ,there are 2 filaments,one for brake light and one for the tail light,hope that help ...

...STILL DONT WORK.TRANSMISSION NEUTRAL REVERSE SWITCH BAD.TAIL LIGHTS REPLACE BULBS CLEAN BULB SOCKETS. IF BULBS DONT STILL LIGHT UP.REPLACE BULB SOCKETS IF THEY ARE REALLY CORRODED REAL BAD

How do I change the tail lights on my 1987 Nissan Pathfinder? There are access panels on the inside of the cargo area on both sides behind the tail lights to replace the bulbs.

...tail light lens cover for a 1987 Nissan Pickup truck You can't remove the lens cover. The tail lights are molded as one piece. If you want to change the bulbs, there should be an access panel ...

replace the master switch & now I have my high beams that I never had before & my cruise control is also working again now that I replaced the master switch but I STILL have no reverse lights.

...working. The front marker lights work. All the bulbs, fuses and fusible links are OK. I recently replaced the alternator. Have you tested for power and grounds at all the sockets