Questions & Answers for: replace surface light ge spacemaker

...surface light bulbs were not working, so I replaced each one (they were blown). After replacing bulbs I depressed keypad for surface lights controls, but lights will not light. I also noticed that ...

...light on to the microwave. It tripped the breaker and shot the surface bulbs. I replaced the bulbs but they still do not work. Everything else on the microwave works including the exhaust fan. I was ...

surface lights replaced and will not turn off I broke a surface lightbulb replacing it, replaced both bulbs, now they will not turn off, did you pinch a wire?

...surface lights recently went out. We replaced the two bulbs but it the lights still will not work. Any suggestions? We see (and repair) this a lot. The problem is on the control panel, which we ...

...they are controlled by the circuit board and it is not repairable. The board will have to be replaced.Depending on age of unit you should call manufacturer and see what they say < might repair ...

...replace, and if yes, can someone let me know where the fuse is located ? Everything else on the microwave works, just not the surface lights. I suspect the fuse does not have anything to do with the ...

replace the surface light underneath the oven? That's on page 33 of the owner's manual. If you've misplaced yours, it's archived online here. Cooktop Light/Night Light Replace the burned-out bulb with

...surface light bulb in my GE Spacemaker XL1400 microwave oven. I tried to unscrew the bulb and it came apart. I think the base of the bulb is stuck in the socket. How do I get it out and replace the ...

...surface light don't work. Everything else works OK. The surface light will turn on if it is set to come on and go off at a given time, so I know the light works. The vent flap can be opened & closed ...

...surface light will not turn off ? both surface lights changed, but the surface lights will not turn off, everything else is working? This sounds like the control board also called a smart board in ...