...struts in the bottom that are broken or have seperated from the top half. If there is a broken strut you will need to replace it. You could try holding the pulley with one hand and trying to rotate ...
Whirlpool Calypso ''ob'' problem My Worlpool Calypso stopped spinning and draining and there is a "ob" on the display. I took out all the clothes thinking ob was for out of balance - still doesn't ...
Whirlpool Duet Washer GHW9400PW2 without the shipping brackets. The tub came disconnected from the top springs and 2 of the bottom struts. How do I get the drum reattached to the springs? It is HEAVY.
Question about LTE5243D Top Load Stacked Washer/Dryer
...struts, shocks, springs...they are called different things depending on who you speak to. Apparently on the heavy duty thin twin stackable units they are all bad and last for about 13 months just ...
Question about LTE5243D Top Load Stacked Washer/Dryer
...whirlpool LTE5243DQ6 model stack 24in washer dryer. I use it little because it is my vacation home. The last wash I heard the off balance clunk and when I lifted the basket back even to balance it as ...
...and very intermittent off balance errors, it will frequently get worse. The fix is to replace the 4 struts. They come in a set. This should fix. Rich Western Appliance Repair Appliance Repair ...
stop during spend cycle is the desplay showing UL if so replace the strut rods, there are 4 rods one at each corner under the top holding the basket up
...replace the worn or damaged pump, thencarefully tighten the hose clamps and check for leaks before installing the cabinet or front panel. All front-load washing machines have shock absorbers that are ...
Question about Cabrio WTW6600SBT Top Load Washer
...replace the worn or damaged pump, thencarefully tighten the hose clamps and check for leaks before installing the cabinet or front panel. All front-load washing machines have shock absorbers that are ...
Question about Bravos Top Load Washer
...Replace all four struts 1st make sure all four feet on bottom have equal pressure on them , then this machine if made past march of 2010 has a gyro on it that is suppose to redistribute the load ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions