...steering. it is a 4 cylinder engine. how do i replace the hose? follow the line to the rack and pinion. Take the line loose there and at the back of the pump. replace it with the new one. Should be a ...
...steering rack, spray adjustment treads with penetetrating oil to help it spin free. You may have to lock the adjustable shaft by the placing wrench on the hex portion of the shaft just inwards of the ...
replace a rod that is loose and it will cost me $200!! What rod is it? and is it worth $200? THE APPLICATION OF FORCE WITH A LONG BAR TO THE SUSPENSION WHILE IT IS JUST LIFTED OFF THE GROUND WILL SHOW
...steering the vehicle with the tire). While doing this look at the end of the rack and pinion and see if there is any movement. If so, the bushings are worn and need to be replaced. The dealer will ...
steering rack and pinion assembly. The removal and installation procedures are similar and the following procedures should suffice for both units. And, as with the standard unit, the complete variable
...Steering Rack -I don't think you need to replace the inner tie rod ends as well unless they have excessive play. REMOVAL & INSTALLATION The power steering gear should not be disassembled in an ...
Question about 1996 Intrepid
...and give it a hard shake in and out alternately. There should be no looseness evident in the feel of this.If there is, check the tie rod end ball joints, and the steering rack end ball
Question about 1999 Grand Caravan
...replace the tires or after every time i turned a sharp right the fron woul vibrate or feel like a loose tire. i took it to mechanic and he redid the front end alignment, but it still does it. what ...
...steering rack bad or damaged Ball joints / control arms come to mind. Jack and block the front of the vehicle so the front wheels are off the ground. Lift straight up and down on the wheel to detect ...
Question about 2004 Blazer
...steering wheel I'd have a few things checked out by a pro since it sounds like this can be dangerous. 1st is your front Sway bar and bushings, have your rack and pinion checked out by a pro. Also ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions