Questions & Answers for: replace starter 2006 toyota corolla

Question about 2006 Corolla

1 Answer

...and the plunger, or replace the starter. I change contacts in my shop 3-4 times a week. Quite a common failure. The clicking noise is the plunger hitting one contact, but not the other, due to

Ad

Question about 2005 Corolla

2 Answers

starter fluid in it starts and then cuts off. i press the excelerator to make it keep running put it sputters and cuts off. should i change the fuel filter or the injectors or is it just bad gas? this

Ad

...starter motor.Im assuming you have oil in engine and havnt seized engine .As most on here dont give much info and there are a lot who like to guess and replace stuff because someone said he had same ...

Question about 2006 Corolla

1 Answer

...me, maybe the bendex gear?? do i need to change the whole starter? You have to remove the starter and the starter drive is a part inside the starter. It's easier to just replace the entire

...starter on a 2006 toyota corolla? The old starter just barely starts the car (2006 Corolla, Auto, CE, American made (Vin: 1NXBR32...)), when someone is hitting the stater with a metal pipe, wrench, ...

Question about 2006 Corolla

1 Answer

No start Battery good, will start when jumped to hotwire, replaced neutral switch, relay, and ignition it could still be your battery, you need to run a load test (need a testing device). If battery ...

...starter, battery, engine turns but not start as steering wont unlock, locksmith, auto electrician and mechanic cant fix, what do I do? Have a dealer replace the key /cylinder assembly Hi, I seem to ...

Question about 2006 Corolla

1 Answer

...fuse about an inch from the battery post. These assemblies were prone to failure, but do not need replacement. All you need to do is take them all apart and clean them REALLY well, with a wire

Starter went out on 2006 Toyota corolla. Neighbor replaced starter through top by loosening manifold. Now car starts but won't stay running. Is this a vacuum leak? Might be especially if it was the ...

...Replace this wire with a thick one to hold the current during starting. Also battery to starter wire should be thick enough to hold the current during starting. - Check the alternator output and the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...