...replace the serpentine belt 4 or 5 times in less than a year. I have replaced the idler bearing and then the water pump went out which took out the belt as well. The belt still came off after ...
...serpentine belt too. If you can borrow one from a neighbour you can get one at PartSource. (Part# 648451) On other models you will have to loosen the adjusting bolt on the alternator bracket. If ...
...serpentine belt fix the problem? It depends if the Serpentine Belt is worn or not, i.e. cracked, glazed, dryed out. If it is good and the belt is still squealing than it may be a bad Belt Tensioner, ...
...serpentine belt too. If you can borrow one from a neighbour you can get one at PartSource. (Part# 648451) On other models you will have to loosen the adjusting bolt on the alternator bracket. If ...
...ztech eng To change the water pump you need to remove the serpentine belt, remove the pulley from the water pump, rotate the water pump within the housing and replace it. Reinstall, check for
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
