Questions & Answers for: replace rear turn signal 2006

Question about 2006 LaCrosse

1 Answer

...rear turn signal is not working but the bulb is OK. Can part of the wiring be replaced or do I replace the entire tail light? Are all the other lights working, tail, stop and hazard? Let me know. ...

Ad

...easy to change a rear turn signal light on a 2006 Buick LaCrosse yes. open the trunk. Then pull back the carpet over the rear of trunk then take off two or three bolts. then the light should come

Ad

Question about 2006 LaCrosse

1 Answer

REAR BULB ON A 2006 BUICK LACROSSE Asuming you mean taillight/turnsignal, and not highmounted brake light: 1.open the trunk 2.Remove 4 wingnuts on trunk trim (there are two on each side) You can do it

Question about 2006 LaCrosse

1 Answer

2006 lacrosse brake job estimate If your car needs rotors and pads front and rear , a shop will charge between 4-600 for complete brake job.

Question about 2006 LaCrosse

1 Answer

headlights shut off at night when driving, i have replaced turn signal switch and headlight switch. check the headlight relay it may be getting hot and shutting down

Question about 2006 LaCrosse

1 Answer

...replace the left front turn signal bulb? Remove the front fender liner to gain access to the front side marker lamp. Remove 3 screws from park lamp and pull out lamp. Twist the bulb socket and pull ...

Question about 2006 LaCrosse

1 Answer

...replace aleft rear turn signal bulb on a 2005 lacrosse. I removed two wing nuts but cannot remove assmbly. Is there another wing nut holding it in. I cannot find it? 3 wing nuts. here is the info ...

...turn signal flasher on 2006 Buick LaCrosse turn signal flasher is usually located, in most vehicles, in or under and in back of the dashboard glove box, or in the area of the fuse box..which could be ...

...valve on 2006 lacrosse I have an '08 and mine is located on the drivers side in the rear. It's tucked up behind the tire and the bumper. Wear safety glasses. Dirt and debris will fall in your

...turn signal Low beams not working high beams only if i hold in the turn signal this sounds like a bad dimmer switch not functioning. I would first check to make sure the rod that runs from the lever ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...