Questions & Answers for: replace pulley maytag atlantis washer

Question about Atlantis MAV6260AWW Top Load Washer

1 Answer

pulley and replace on a maytag atlantis washer? bshu, first get yourself a bunch of rolled towells or something of that nature to place between the tub and rear cabinet. This way when you lean it back

Ad

Question about Atlantis MAV6000 Top Load Washer

2 Answers

...replace the belt. The motor is spring loaded and acts as the tensioner up to a point of too much wear on the belt. You will need to tilt the washer about 45 degrees and prop it to keep it from going ...

Ad

Question about Atlantis MAV7260B Top Load Washer

1 Answer

...pulley breaks loose from its spot welds and then will rub metal to metal.when ordering parts replace belt too if damaged.if worn wont get a good spin and then dryer has to work over time.[power bill ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...replace a pulley on the maytag mav6000. I just replaced my belt and it worked about half way through the cycle and stopped. I looked an one of the pulleys is broken i am instructing on the motor ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...a partner to assist. You can replace the whole thing or just the bearing and save the pulley for a rainy day if you want. I opted for the whole replacement. But I saved the old. cause ya neva

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...on a top load maytag machine? thanks no this machine has a thrust bearing not a clutch if the machine is not spinning well you need to replace the thrust bearing kit it come with a new drive ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

pulley and starts to rub against the frame of the machine making a very loud loise. How do you replace this part or does a professional need to do this? The entire pump must be replaced. You can do it

Question about Atlantis MAV7260B Top Load Washer

1 Answer

...pulley and found no restrictions. When I replace the belt, the motor bogs down and will turn the load. The washer was empty during this process. Please help. Thanks The motor bearing are shot and ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...on but when i open the lid its not spinnig. I checked the belt and its intact and moves ok. Is my problem the transmission pulley & bearing kit? Replace the lid switch. Here is the part to

Question about Atlantis MAV6451 Top Load Washer

1 Answer

washer will not agitate without a grinding noise Check bottom pulley is fitted correctly & fitted with he right tolerances, check pump bearings. If all these are ok then gearbox needs replacing.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...