Questions & Answers for: replace power cord mac

...1. remove power cord. 2. Then remove battery. 3. Now hold power button down for at least 5 seconds. (Nothing will appear to happen). 4. Replace battery. 5. Replace power cord. 6. Power on

...power, NOT the symbol for charging. This is happening off and on, not all the time, but seemingly getting worse. Hi, There could be some sort of fault within the cord. The best thing for you to do ...

cord in the laptop while holding the power button down. If you hear a chime, either the jack or the cord is no good. If not you need to get the cord tested. If you have a meter you can do this, if not

replace the old power cord. If the computer uses a power adapter, try connecting a different power adapter to the computer (if you have a working one available). If the computer starts up, replace the

...and power cord. Hold down the power button for 3-5 seconds. Replace the battery and power cord, and try it again. If this doesn't work, take it to the Apple store, as it is likely a hardware

...power cord. I don't own or have any immediate access to a mac computer either so I was wondering if it would even be worth the time or money to get a power supply cord or even if i do, would it ...

Power cord.• Once all connections have been disconnected, remove the power cord from the Mac.• Wait 20 seconds.• Reconnect the keyboard, mouse and power cord  back into  the computer.• 

...power cord and adapter are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device If the wall outlet is working and you continue to have ...

...power cord. 3.Press and hold the Mac's power button for 15 seconds. 4.Release the power button. 5.Reconnect your Mac's power cord. 6.Wait five seconds. 7.Start your Mac by pressing the power button. ...

...POWER CORD AND OUTLET TO MAKE SURE IT WAS WORKING PROPERLY AND THEY DO, BUT STILL THE COMPUTER WILL NOT TURN ON AT ALL. I ALSO TRIED RESTETTING THE TOWER BY PRESSING THE PMU BUTTON AND I REPLACED THE ...