The Heater/ac fan only works on high Replace the switch on the dashboard. its the resistor or at least thats what my dakota and i replaced the resistor and it worked
...G6 For the question that stated that the heater fan doesn't work on 1 and 2, why did you say to replace the dash switch? why would that stop the first 2 from working and the other ones work fine? ...
...heater/AC in my '05 G6 only blows on high. Do I have to take it in to a dealer or can I reset it myself? Your blower motor speed is controlled by a Blower Motor Control Processor and a HVAC control ...
Question about 2007 G6 GT Convertible
Pontiac G-6 blower on my heat will not turn off when I cut off engine. Light that displays internal temperature will not cut off either. In past few weeks my warning lights for service or problems has
Question about 2005 G6
heater doesnt blow heat and sometimes works but only on high setting when it does happen to work if i change to lower setting then back to high it wont work, i already replaced the resistor This ...
...resistor all with new ones, no change. Motor made no noise when working so leaning on that that is not the problem(could be wrong on that) Do you think it could be the heater control panel. Replaced ...
pontiac g6 2006 heater/ac fan doesnt work on #3 speed setting, fan made squealing bearing noise for a while but quit, also inside/outsied air vent switch vent makes clicking noise when set to outside ...
Question about 2005 G6
...pontiac g6 ? You will need to replace the "Blower Motor Resistor", which is not difficult for the average person to do. Here's a video demonstrating how to do it: 2005 Pontiac G6 Blower Motor ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions