Questions & Answers for: replace oil pressure sensor 1991

1991 ford tempo is overheating resulting in loss of power we recently purchased a 91 ford tempo and it has recently developed an overheating problem which cases it to lose power. it only seems to ...

Ad

...1991 Ford Tempo , 4 cyl.,auto. It's right next to the air filter and behind the radiator fan and to the right of the oil dipstick. The transmissions is black and the oils is yellow. If it's a manual, ...

Ad

1991 ford tempo auto trans will not go foreward nor reverse the car was operating fine. i parked at a store parking space. i returned 15 mins. later, started the engine, shifted it into reverse ...

...could be going. Check for 35-40 PSI at idle. Don't have too much oil in engine as it will splash and foam and engine will fail. check your tps throttle position sensor most autoparts stores can test ...

Question about 1991 Tempo 4 Door

2 Answers

...Oil Filter Changed. Power Steering Fluid was also really old and dirty, had that changed too. Now, I spent $60.00 to have a mechanic diagnose my over heating problem. Apparently my Thermostat is ...

...is black smoke coming out of the exhaust the mapo sensor is bad also you could have a vacumn leak which will not let the map sensor work correctly check for air leaks and test/replace the map ...

pressure is fine. Could it be an oxigen sensor?? oxigen sensor doesnt cause such sort of problem . i think you should check your gear box and lubricate it finely also check the oil sump. Your feedback

...Oil pressure gauge works but as the car heats up after about 5 minutes the gauge drops to zero (no oil pressure), oil is pumping up to the cylinder head, drove the car for about 60KM and no problem ...

Question about 1991 Loyale

2 Answers

...oil pressure gage does not register in idle but registers normal when foot is on the gas? try replacing the oil sending unit, it should be located near the oil filter I had the same problem, took it ...

...the brushes with oil, they are damaged The minimum voltage is 12.5 Should read about 14v when running. Make sure the belt isn't slipping because of the oil. Replace the brushes or new

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...