Questions & Answers for: replace oil filter seal 2006

...oil filter housing situated just forward of sump, replace filter and sealing ring/washer. Refill via filler tube 8 litres and run engine till hot. leave for approx 2 mins and check level via ...

Ad

...oil filter which is in front of the engine on a 2000 chevy impala The oil leak will be coming from either the oil filter base or the gasket that the base of the filter called O ring or the front seal ...

Ad

Question about 2006 Impala

1 Answer

...the low Oil pressure light came on. However, it seems more like an issue with the actual sensor then the car. I am looking to get help finding this sensor so I can replace it. Usually near the

...Engine Oil Type - Weight - Capacity: 4 Application: Oil for use in temperatures below -20 degrees Note : Quarts with filter change Hope this help (remember comment and rated this) TY for using

Question about 2006 Impala

4 Answers

...thank god 29.99 per wiperblade and two windshilds dang trucks with no mudflaps LOL OIL COMING FROM OIL FILTER.CHECK OIL FILTER SEE IF ITS LOOSE OR DAMAGED.IF ALL LOOKS GOOD REPLACE OIL

...oil from the fiter Eithe the filter is bad, or the filter needs tightened or it was installed incorrectly and cross threadeds. The rubber seal on the filter could aslo be torn or not lubricated when ...

...OIL FILTER 2006 IMPALA my 2007 Impala leaks oil and im thinking its the fliter housing its hard to get to but im going to take off the front bumprer to get to it seems tobe the best way to remove it ...

...filter replacement the car lost reverse 2006 Impala 3900 V6 with the 4t60e transmission Loss of reverse is a symptom of a failed transmission. sound like transmission fluid level low. your ...

Question about 2006 Impala

1 Answer

oil and replace it with new oil, except add a quart of automatic transmission fluid in place of one quart of oil. Some people say ATF is bad for seals, some people use ATF to rejuvenate leaking seals.

...oil pan. Inspect the pan for damage and replace the pan if necessary. 5. Install the oil pan. 6. Clean and dry the oil pan. Inspect the pan for damage and replace the pan if necessary. 7. Install the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...