Questions & Answers for: replace mercury grand marquis ignition

ignition is turned on I have heard this is common problem. The ticking sound comes from a part about the size of a pack of cigarettes. It is made of [plastic and has small gears inside. I want to find

Ad

Question about 1997 Grand Marquis

1 Answer

...replace the O-ring seal on the thermostat housing. Position the housing and upper hose and install 2 retaining bolts. Torque to 15-22 ft. lbs. (20-30 Nm). Reconnect the heater water hose. Reconnect ...

Ad

...replace and if its something a poor weekend warrior might be able to perform... My '95 Mercury did the same thing. It had a broken actuator inside the tilt column. Cost $13.00 from Ford dealer. Was a ...

...mercury grand. The coolant is full and the two hoses going through the firewall are hot. could this be the heater core? the defrost still works and theres no liquid in the car. something wrong with ...

Question about 1994 Grand Marquis

1 Answer

...Mercury Grand marquis stopped working abruptley. What should I be checking for? Core not clogged or leaking. sudden failures are usually the blend door actuator. Unfortunately, you have to remove the ...

...Mercury Grand Marquis Ls with a gas gauge that does not work (it also may be reversed as in when the fuel is full the gas gauge reads empty) could this possibly be the sending unit??? if so do i have ...

...mercury grand marquis I was in park with my wheel turned pretty far over. I flipped the key back to roll down the window but still keep the car off. When I flipped it back, it made a click noise and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...