Questions & Answers for: replace map sensor envoy

...MAP sensor.It is located on the top of the engine.  You will see a blue sticker with Delco Motors  5V GND written on it.  Has a wiring harness that you can pry up and pull off.  ...

...replace a manifold absolute pressure/ Barometric ciruit low input sensor UNPLUG WIRING HARNESS FROM THE MAP SENSOR ( LOCATED ON THE TOP OF THE ENGINE ON THE INTAKE MANIFOLD,) REMOVE U SHAPED RETAINER ...

how do you replace the MAP sensor in my 2004 GMC Envoy XL 6cylinder pop it off the top of the manifold. it is directly on top of the intake manifold. has a clip holding it on.

...MAP sensor. What should be the next thing that I look for? Check the intake manifold for loose or leaking hoses. Also, clean your throttle body with throttle body cleaner, WITH the battery ...

...the firewall, then turns right and into the throttle body. On top of the upper intake manifold is the MAP sensor. Probably the easies sensor to replace on the entire engine. Just inplug and

...replace MAP sensor. Other MAP sensor trouble codes include P0105, P0107, P0108 and P0109. P0128 OBD-II Trouble Code Technical Description Coolant Thermostat (Coolant Temperature Below Thermostat ...

...MAP sensor, cleaned the throttle body, and replaced the throttle body pedal sensor. I am out of ideas on what would be going on. You can smell fumes when reving the engine, and the rocks by the ...

...MAP AND MAF SENSORS, CHECKED PLUGS AND WIRES WITH PROBLEM STILL EXISTING... WHAT DO I DO.. the sensor to replace is the HO2S sensor which is different to an O2 sensor. (has a different function) code ...

...with a letter Steve, the MAP is on drivers side next to firewall up top on the I6 engine. You can try cleaning it with sensor safe electrical spray. But I've found this doesn't work, just replace

I just replaced a map sensor on my 04 GMC Envoy 4.2. It won't idle and shuts off help please Check for proper fuel pressure and vacuum leak Any codes that pop up? Intake leak codes?