shift into drive My 2002 ford escape battery failed. After trying to start the car and failing, I attempted to shift the car into gear with the key in the ignition. It would not shift into gear at all
...shift down to first gear it works OK. I can drive by starting in first gear, shifting up to 2nd gear manually, and then shifting to Drive. Does anyone know what would cause this? Why would it go into ...
my automatic gear shift will not engage. It easily moves up and down but doesn't engage. 2001 ford escape. Drove fine last night but today, it won't go into gear. your shifter cable popped off
cable and make certain it is not broken, if ok the the servo has likely failed. You're best off checking out the repair manual for your car: here: Ford Escape Repair Manual Also check if there are any
...shift lever pin. I am told that a grommet has worn out and fallen off and that the only repair is to replace the entire cable. Is this true? Well, being that Ford and every other major auto ...
...to your transmission. Moreover, is this a manual transmission or automatic?. If this is a automatic, you maybe able to manipulate the shift linkage cable on the transmission and get it out of
...no resistance what so ever If the vehicle will not go into gear as well, then the chances are good that the shift cable has become disconnected at the column or the transmission, or it simply ...
2002 ford escape diagram shift linkage Check in a work shop manual.
...shift cable. is the cable loose and sloppy? if so please inspect the end of the shift cable under the dashboard. If your issue is different and you need to adjust (recenter) the shift selections. The ...
...I was pressing gas pedal but my car was not in any gear. Shift lever moves freely and vehicle won't move forward or reverse. Go see if your cable has become disconnected/broken leaving you in
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
