Questions & Answers for: how to replace hoover steamvac turbine

replace the brush drive belt. Hoover Steamvac wide path spin scrub Hoover steamvacs don't use belts. If the brushes are not turning, pull the brush block out, turn the machine on and see if the square

replace my brush turbine on my Hoover SteamVac Dual V F7431-900. My brushes stopped spinning and I believe this is the problem. Thanks first you must remove the dirty water tank then the nozzle window

...by removing the hood. You can find a genuine hoover replacement part by following the link below. Just find the model number of your Steamvac. ...

...replace the Turbine Gear for $32. Follow the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 replaces part numbers 43191006 and 43191018 Hoover F74XX Parts Link ...

...Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 F7425 Parts Link http://www.usavacuum.com/Hoover-Steamvac-s/109.htm Make sure the ends of the brushes are not bound up with hair, lint ...

...find a genuine hoover replacement part by following the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 F7425 Parts Link ...

...a genuine hoover replacement part by following the link below. Turbine Brush Gear Part # 43191008 F5914 Parts Link ...

...replace or inspect The brushes are turning by an air driven turbine. The turbine has a pivot bushing made of steel inside of it that gets rusty because of the water that is running through it. The ...

...hoover steamvac spinscrub the wheels quit spinning on it There is no belt on the Hoover SpinScrub. The brushes are turned by an air driven turbine. To test the turbine, insert a flat screwdriver into ...

...to change the belt? There is no belt on a Hoover SteamVac. The brushes are rotated by an air driven turbine. If the brushes aren't spinning, you most likely need to replace the turbine