Questions & Answers for: replace hood release cable 2000

...hood release is stuck. Ok, open the door, stand next to the door, pull the hood release while slapping your hand on the hood or have someone else lift the front edge while you pull on the latch..... ...

Ad

HOOD RELEASE ..NOT OPENING HOOD LATCH 2000 TAURUS STORED OUTSIDE (CHGO AREA) 10 TO 20 DEGREE DAYS RECENTLY. TRIED TO OPEN HOOD VIA INSIDE RELEASE. NOPE, NOTHING. THIS IS A "SE" VERSION. ANYONE KNOW IF

Ad

Question about 2000 Intrepid

2 Answers

...need hood open now. if not, stop at dealer a.s.a.p. and grab new handle assy, or autowreckers, and replace it before you destroy cable by using pliers etc.If cable actually broke, see above

...hood release cable broke right where the cable goes into the lever. The little piece at the end of the cable is still in the lever. I tried to pull on the cable using a pliers to open the hood but it ...

...is broken on 2000 grand prix unable to open the hood depend where it`s broke if lever inside the car is broke try getting some plyers on the cable to open the hood and replace cable once hood is ...

...hood. then replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to ...

Question about 1998 Corolla

1 Answer

hood release on a 1998 corolla is stuck and can't be released by pulling the release cable, how do I open the hood? You need to remove the black plastic mud guard from under the bumper, use a 10 or 12

Question about 1990 Corolla

1 Answer

...the cable is broken You should be able to see the mechanism from under the front of the vehicle and reach up to release the hood manually. All the cable does is pull back a lever nothing

...hood release lever froze up and just needed replacement. My hood release lever on the inside of my Jeep felt loose when I tried pulling it. If your hood release lever feels loose it may be a frozen ...

Question about 1998 Corolla

2 Answers

...release the hood or with a long screw driver under the bumper push the release at the latch Find the cable looks like a brake cable on a bicycle, it runs under the fender to the lower part of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...