Questions & Answers for: replace heater core 2007 dodge

Question about 2004 Ram 1500

1 Answer

...heater core, and flushed the radiator and replaced with new fluid, then bled out all bubbles. Still no heat. You probably just need to backflush your heater core. You can use a hose to flush it back ...

Ad

Question about 2007 Ram 2500 Mega Cab Laramie

1 Answer

...cab filter 04 dodge ram pickup trying to find the cab filter 04 dodge ram pickup need to claen or replace filter to increase A.C. air flow everything i know about the truck indicates they dont have ...

Ad

...heater core tested and they said it was flowing fine and functioning....what else could i check to help fix the heat. it is getting cold here and i need it asap please help is this a problem w/ the ...

Question about 2007 Ram 1500 Quad Cab Sport

1 Answer

2007 dodge hemi coolant pipe rusted out is the metal tube for the heater core on front of engine replaceable without waterpump If it's threaded you can replace just that line.

Question about 1998-1999 Dodge Ram 1500 Truck 4WD Front Wheel Bearing & Hub Assemb

1 Answer

heater in dodge pickup not heating properly Could be blockage in the hoses faulty tap blocked core or baffle in the heater core fallen off.

...heater core is clear, not cloged check that the heater control is working and allowing water through the heater . Check that there is not an air lock in the cooling system that is preventing coolant ...

...heater is fed by the hose by the upper rad hose return is the hose going to the water pump, to bleed the air out fill rad leave the rad cap off start engine run for 5 min. the check the coolant ...

...replace a heater core in a 99 dodge ram pickup truck with v10 The entire dash assembly including air bags will have to be removed to access the heater core assembly. If equipped with AC, the system ...

...heater core to water pump and intake on a 2003 Dodge Ram 1500, 4.7 Magnum engine. ...

Question about 2003 Ram Pickup 1500

1 Answer

...heater core ? When car is at operating temperature, carefully touch both hoses which should be warm or hot. If only one if hot, then you may have a bad actuator. If both are hot, you may have a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...