front level (right hand switch housing) or rear brake cylinder. One or both may be stuck. You may need to clean or replace. ~ Jeff get a test light and start following the wire back. you will find one
Question about Harley-Davidson Motorcycle Desktop Telephone
...replace it. if you have foot brake and no hand brake light then it would most likely be the brake nipple in the hand switch. but you did not say so I assume no brakes foot or hand. It could be on and ...
front brake master cylinder to the handlebar and slide the master cylinder back towards the switch houslng as far as you can. They should be touching. If the light still won't turn off, you'll have to
Question about 2003 FLHTC Electra Glide Classic
...front hand brake sensor. You may have a bad rear brake light switch. Find the rear brake master cylinder and the metal hose coming out of it going to the rear brake. Follow the line as it goes under ...
Question about 2003 FLHTC Electra Glide Classic
harley sportster 883 I dropped the bike and now the brake light doesnt go off, want to know how the front brake assembly attaches to the back break assembly The front and rear brake assemblies are not
Question about 2006 FXDWGI Dyna Wide Glide
...hand brake in to stop the brake light does not light. applying foot brake does light brake light. where is the brake swith at on handle bars The front brake switch is located inside the right ...
Question about 2008 FLSTN Softail Deluxe
front brake light switch for 2008 harley softail deluxe location and instructionsfor removal brake light not working with foot brake or hand brake. replaced blown tail/brake light bulb and license ...
Question about 2005 FLHTC - FLHTCI Electra Glide classic
...replace the brake switch on the bottom of the frame and the problem continues. Any ideals. Usually when I see this, it is a bad brake light switch in the right hand handlebar switch housing. Most of ...
Question about 2008 FLHTCU Ultra Classic Electra Glide
...front brake master cylinder with one hand and retighten the housing screws with the other. If that doesn't work check continuity of the rear brake light switch with a test lite. if it lites on both ...
...front switch button again. If the button works then reinstall the switch housing and push it towards the master cylinder hard and hold it with one hand and retighten the screws with the other. If you ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions