Questions & Answers for: replace fuel pressure sensor 2007

replace the fuel pump while you are there.You will have to Pull the strainer off the fuel pump and discard it. remove the retaining clip for the fuel pressure regulator so that you can remove the fuel

Ad

...fuel filter on 2007 cadillac cts How to change a fuel filter on a 2003 Cadillac CTS - YouTube ? 11:01 https://www.youtube.com/watch?v=SRI7SPzVzvk Jun 2, 2014 - Uploaded by 2LateIWon How to change a ...

Ad

...fuel pressure regulator located on 2004 cts Sensor ? The question said regulator Both are on the fuel rail on the top of the engine. Sensor will have wires, and the regulator will have a vacuum hose ...

Question about 2007 CTS 3.6L

1 Answer

...Pressure Sensor Could be a bad sensor or other issue Have a repair shop smoke test it,actuate the sensor & see if it is working A scan tool will also be needed to look at the sensors data ...

Pressure (EOP) Sensor (LP1/LY7) In the engine compartment, on the left side of the engine, in the oil filter housing Engine Oil Pressure (EOP) Sensor (LS2) In the engine compartment, on the top, rear,

...fuel tank pressure sensor on a cadillac cts 2006 3.6 L? The pressure sensor is a part if the fuel pump assembley. If you drop the fuel tank you will see a small black box on the top of the fuel pump ...

...2007 Cadillac cts? I was told bank 1 sensor 2 on drivers side. Is bank one on the passengers or drivers side? Bank one is on the drivers side. Repair Guides Component Locations Camshaft Position ...

...2007 Cadillac CTS/CTS-V https://cdn.dealereprocess.net/cdn/servicemanuals/cadillac/2007-cts.pdf Warning Lights, Gages, and Indicators .... 188. Message Center ... 2007 Cadillac CTS/CTS-V Owner Manual ...

Question about 2007 CTS 3.6L

1 Answer

...fuel pump and Miss wired it the first time realized as soon as I turned Key on so went back and reworked it correct way but now on the radio screen it says low oil pressure and also a service ac ...

...sensor there's no service engine light on but it's still ride sluggish when accelerating could be that the cat convertor is plugging up Check fuel pressure, check for restriction in exhaust

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...