Questions & Answers for: replace fuel filler neck 1998

...fuel nozzle, doesn't help. the filler neck would have to be replaced. ford has had problems with their filler necks in that year. it consist of 2 tubes one inside the other, that other tube could be ...

Ad

...fuel as possible, for safety and weight. secondly the tank doesnt have to be fully dropped there is enough room to be able to replace the sensor therefor you can leave the filler neck and tubes ...

Ad

...REPLACE THE FUEL PUMP ON 2003 CHEVY S10 PICK UP Removal & InstallationTo Remove: Properly relieve the fuel system pressure. Drain the fuel tank through the filler pipe. Support the fuel tank. ...

Question about 2007 E320 BLUETEC Sedan

1 Answer

...is contacting inside of filler neck . Can top of filler neck be replaced without the whole fuel tank. Replaced with oem cap same problem YES IT CAN FROM THE RUBBER HOSE UP TO WHERE YOU PUT THE GAS ...

...fuel filler neck is worn, or otherwise compromised, which will also allow the fumes to escape and light the light. 3. There could be rust on the filler neck tube, which would not allow a tight seal ...

...fuel filler neck grommet wont fit I have purchased 2 filler neck grommets 1 from Napa and 1 from Ford. Both are about 1/4" to large to fit into the hole of the fuel tank. From whats left of the old ...

Why does it take a long time to put fuel into tank. Fuel does not want to flow into tank. Come back up the filler neck Either needs new filler neck, and or vent line to canister is pinched or plugged

...fuel tank filler. Use hand operated pump device to drain fuel tank. Remove fuel tank. tip tank to drain the remainder. out here is one more way. (IDEA!) do 1-4 then tip car to left. Jacks then stands ...

...fuel filler neck. 6)Loosen up the hose clamps on the rubber fuel filler hoses. (at the neck side); once the clamps are off plan on buying new ones. This next part of the job is VERY IMPORTANT! use a ...

...replace a fuel filler tube on a 2005 Pacifica? I looked up fuel tank filler neck in online parts book. At the gas cap, is there three screws holding the top part of filler neck? If so, remove the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...