Questions & Answers for: replace front wheel bearings 2007

Question about 2007 Fusion I4 SEL Sedan

1 Answer

...front assembly It sounds to be a Constant Velocity Joint (CV JOINT)...You can look under the car at the ft.axles nd inspect the cv joint rubber boots...Normally they will split from wear or road ...

Ad

...front hub bearings so I did the right and left turn test when driving down the road but the noise did not get louder nor dissipate.. could they be related Any help?? Some do not kick in untill it ...

Ad

replace front wheel bearings on a 2010ford fusion pressed in hub Go to You Tube Video You will be able to watch what your asking. At the top left of you tube video put in your question & look for ...

Question about 2007 Fusion I4 SEL Sedan

1 Answer

...like grease on the wheel bearing on my 06 ford fusion when I changed my brakes and rotors. How should I check the wheel bearings or should I replace them Check for Cracked CV Boot. Will Sling ...

Question about 2007 Fusion I4 SEL Sedan

1 Answer

...to all in reverse, it could be a 4 hour job, or longer, you may even need to remove the front wheel and inner guard just to get at the front pulley, like I said it's not a little job, hope this ...

...replace a hub assembley bearing on a 2007 ford fusion Remove the brake parts,axle nut if there is one & four bolts holding the wheel hub bearing assy on to the steering knuckle If you have no ...

front wheel hub assembly needed Axle nut/bolt, Hub bolts the four axle nuts, 98 ft lbs, tighten in criss-cross pattern. The hub nut/wheel bearing, 148 ft lbs, use new nut, don't let vehicle weight sit

Question about 2007 Fusion I4 SEL Sedan

1 Answer

...front wheel bearings Yes, your model does have front wheel bearings. I am wondering what you want to know about them? I do have a few comments about front wheel bearings. If you are considering ...

...and tires spjning removed left frt tire with car jacked up start ed enging put in drive can still hear clicking 2007 ford fusion both ends of shaft are good if shafts are good then wheel bearing ...

...front wheel bearing assemble this weekend and cant find the torque spec for the ale nut. The older model Fusion (up to 2012) ... BHA54317 Axle / Spindle Nut Torque Specification - 1A Auto ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...