Questions & Answers for: replace frigidaire microwave oven door

...replace my door (specifically the frame of the door, part 5304429402) on a frigidaire microwave (plmv168cc1). the door immediately began to deteriorate after purchase from heat from the stove. the ...

...frigidaire over range microwave and it lost all power. it had a loose door switch but would work if i held on to the microwave door during cooking, then the door switch fell out of its holding spot ...

...frigidaire microwave How do I replace/repair it? un plug the oven, un screw the screws and remove the cover, look behind the door where it closes and you will see a micro switch, and two wirers, note ...

...DOOR FOR MY FRIGIDAIRE FMV157GC BUT I HAVE NO INSTRUCTION FOR INSTALLATION.PLEASE GUIDE ME. You can usually find helpful exploded view diagrams and order parts by entering your full model number

...Frigidaire has now agreed to replace the door but won't pay for the fee for the repair person to ''diagnose'' the problem, although the problem has been ''diagnosed'' by phone. Frigidaire also won't ...

...replace door for frigidaire fmv156dc If you remove the vent above the door, a couple of phillip screws hold it on top, it slide off to the left, open the door and pull up on door, look at hinge and ...

frigidaire GLMV169 manufactured in 2005 and purchased in 2006 stopped working. There is no power. The clock, buttons - everything. Tried changing the outlet and flipping fuse switch and still nothing.

...Frigidaire microwave, PLMV168, is not staying closed. You could be seeing an issue with either your door latch or latch assembly within the microwave. Since these components require patience and ...

frigidaire microwave and. Every time I try to set the clock it goes back to zero's # lfmv164qfa That model does not apprear to be a valid Frigidaire US model number. Did you try unplugging for about 5

...door it's a frigidaire gallery under the counter Frigidaire Microwave Not Heating Link to parts 20 out of 3 door switches are available =$228.Perhaps a new oven would be a better choice and