Questions & Answers for: replace engine belt 2003 cadillac

...replace an alternator take out the fan first, then u'll see the alte. on the bottom left of engin, take the bolt from the top of alte. and the aguster bolt from the bottom of it.(u'll see the belt ...

replace this belt. Need a diagram to install serpentine. i have a 2003 Cadillac cts replaced engine and know my battery completely dies its not the alternator have changed it 4 times and it still says

...engine. he needs to replace his timing belt because it broke but there are multiple timing marks on the harmonic balancer and 4 marks on the block, so he doesnt know which marks to line up on. How ...

...engine and if he has to remove timing belt cover and make sure it is not loose. And do not drive 700 miles you will be stranded and the cost to fix it out of town will be more. At that shop tell the ...

...engine. I'm wondering if timing belt could have slipped, no reason for engine to go (129,000 mi). Dealer will investigate belt for $1000, but wants to put in new engine for $6000. you bent a rod get ...

engine power reduced and won't let me accelerate. I can tell when it is going to do it because the transmission shifts very rough. Any suggestions?? Thanks Check the timing belt and related parts. One

replace all heater hose at the same time to avoid trouble. Inspect all engine and transmission mounts. This is going to be costly but it will safe the labor charge now to complete all the tasks at the

engine the timing belt jumped time i replaced the set it back on the timing marks an it didn't start i a code po 341 so replaced the camshaft position sensor didn't start The same thing happened to my

...belt breaks? Only if the engine overheats. The heads can warp and the radiator might spring a leak. If the engine did not overheat, then just replacing the belt is all you need to do without any ...

...broke replaced tensioner and belt no vehicle tuns over making a whinning noise will not fire or start Try cranking the engine with the belt removed. You may have another pulley that is locked