Questions & Answers for: replace egr valve 1996 toyota

EGR valve Number two would be a failing Idle Air Control valve (IAC). Try this: Open the hood & locate the EGR valve, close to the firewall, behind the intake. Find & take with you a small hammer. The

EGR valve is clogged on the backpressure port, that is the small tube that you need to clean the EGR valve needs to be replaced unless you are sure that air can pass through with the egr valve opened.

...replace EGR valve in 1996 toyota camry It is simple. It looks like a little flying saucer or pancake and it is in the rear of the engine on top near windshield.There are two hoses that plug into it ...

...pressure) sensor is faulty and needs to be replaced There is a blockage in the EGR (most likely carbon buildup) The EGR valve is faulty The EGR valve may not be opening due to a lack of ...

...EGR valve was changed about 18 months ago along with the VSV valves. Any though would be appreciated. It sounds like a dead spot in the TPS (throttle position sensor) it is the only sensor that is ...