...drum has suddenly stopped spinning, its not moving even on a wash cycle. It does not give any error. Any advise would be gratefully appreciated ! cheer Matt Have the same problem, different model and ...
Question about LAB2700ML Pedestal Drawer for Duet Washers & Dryers
...drum still did not turn. there was no smell of burnt motor. the fa belt is ok so either the pcb board or capacitor or the main switch has gone . which one do you think most likely many thanks Replace ...
Question about LAB2700ML Pedestal Drawer for Duet Washers & Dryers
...at all & the drum wont spin & the programme selector just clicks as if its running thru the whole programme ok. Could it be the motor brushes that need replacing?? broken belt check the ...
...belt came off I didn't want to put it back as the drum is completely blocked. Can you help? Thanks. The main tub bearing is stuffed, thus the noise. The spindle becomes loose and the belt rides off. ...
Question about AL130 Front Load Washer
drum belt. You need a socket set to take the motor off and replace.Don't over tension the belt as it will ruin the bearings in the drum and motor.You should be able to deflect the belt by half an inch
...drum does not turn during the spin cycle. Unplugged and reconnected all plugs and connectors and it worked for the rest of the day, but now displays the same problem. your belt in washer is going bad ...
Question about AL130 Front Load Washer
...washing machine won't spin It doesn't spin and the drum won't turn during washing. I was hoping it would be a quick fix like a replacement belt Have you renewed the motor
Question about AL130 Front Load Washer
...is jammed on my Hoover nextra top load washing machine , any advice on freeing it please ? Remove the base to reveal the motor, belt and lower drum bearing. Decide which is at fault and replace
Question about AL130 Front Load Washer
...Heats up, fills, drains ok so thermostats, pressure switch appears to work. Belt ok. Micro switch on rear of drum tested, jumped etc but no luck. Electrical problem, but what's left? DOOR OR LID ...
...drum to engage together? Is it a safety thing? Or do I need to get someone out to look at it? Thanks Natasha Hi, you can close the door and test the machine first. If it does not work properly, then ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions