Questions & Answers for: replace door lock actuator 2004

...What is a likely cause? How do you remove the door panel without causing any damage to it? You need to replace the electric solenoid/actuator for the door lock. The door panel pulls off very

...threads that give step by step instructions on disassembling the door and repairing the lock and handle. There are also several suggestions about steps to take to keep the problem from

door knob on my 2003 toyota sequoia. Any idea how to fix this issue? need to remove back panel.. make sure window is up. there is an opening . willl need i belive a 10mm socket. reremove lock actuator

...door opener 2004 toyota sequoia GOTO HOMELINK.COM THEY HAVE THE INSTRUCTIONS FOR ALL OF THESE UNITS. I'm trying to program garage door to work with panel button on the overhead console is this ...

door panel. Anyone know whats the problem? do you hear the Beep when you press on the remote to lock/unlock? this is to make sure there is communication with system components.... easiest ting you may

...was doing the same thing, except it would not come out of 4 wheel drive, I replaced the diff. actuator and everything has been fine since. It was easy to replace and not an expensive part

door lock/unlock button on the remote all the doors lock & unlock except for the driver door. I have to use the key to operate. My question: is the battery in remote getting weak & not sending

door lock basically unlocks and locks using air pressurized not wires or gears air pressure is directed from a little pump that compresses the air to shoot out the lock probably it is the air line not

...lock and unlocking of the mechanism in the rear door latch with the key fob and the electric button on the side doors, but the outside handle will not open the rear door, then the handle has broken ...

...door and remove connector, get latch and lock assembly out, remove cover(two small screws) to access screw that hold lock actuator, memorize position off lever, remove and replace.......it is quite a ...