Questions & Answers for: replace cylinder head 2002 grand

...PERMANENTLY STRETCH DURING THE INITIAL INSTALLATION. NEW HEAD BOLTS MUST BE USED WHEN CYLINDER HEAD IS REPLACED OR RE-INSTALLED TO OBTAIN PROPER TORQUE. ALWAYS COAT BOLT THREADS WITH THE PROPER ...

Ad

...replace new part on it like timin chin water pump and head gasket. I WOULD CHECK THE IGNITION MODULE IF NO SPARK EXISTS. IF I REMEMBER CORRECT, IT IS LOCATED ON TOP OF THE ENGINE NEAR THE INDIVIDUAL ...

Ad

Question about 2002 Grand Prix

1 Answer

...REPLACED A COUPLE YEARS AGO 10O K ON ENGINE take plug,wire,coil and swap with another cylinder if still #5 missing could be head gasket or intake gasket leaking could also be fuel delivery ...

...2002 Grand Am 3.4 is misfiring on cylinders 2 and 3. I have to gradually accelerate otherwise the RPMs will go up but the car wont go faster. If i accelerate too much, then the car slips. If I ...

at the upper portion of the cylinder head, (dischared side) just trace where the upper radiator hose is attached at the cylinder head side. there you can find the thermostat. Can you do it by yourself

...Cylinder head bolt torque sequence-3.8L engine Install the new cylinder head gasket with the arrow pointing to the front of the engine. Install the cylinder head. Install NEW cylinder head bolts. ...

Question about 2004 Grand Am

1 Answer

...grand am i just changed the head gaskets and now it wont start i cycled the key and it just cranks over but its not fireing My 2002 pontiact Grand Am 4 cylinder Smoks when i started up

cylinder valve is stuck open and the rocker will not stay in place. I have been told I HAVE to replace the entire engine but it seems like I should be able to repair the head only and drive on... I've

...replace another thermostat. If there is no circulation with the thermostat removed, there is a blockage in the cooling galleries of the engine. If chemical flushing does not clear it, it will require ...

Question about 2000 Grand Am GT

1 Answer

...re-manufactured ones. You will need to replaced all the gaskets and cylinder head bolts. I also recommend to replace the engine thermostat when doing this engine work, and also do a complete tune

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...