...2000 LS/LS1/LS2/LW1/LW2 2001-2002 L100/LW100 2001-2003 L200/LW200 2001-2005 L300/LW300 2004-2005 L-Series 2002-2008 VUE 1996-2002 SL/SL1/SL2 1996-2002 SC1/SC2 1996-2002 SW1/SW2 What type of ...
sensor in the ignition switch. Try turning key to run (do not crank) leave key on for 10 minutes, the security light should be flashing. When it stops flashing or goes solid (after 10 min relearn) try
sensor is shot,Unplugged it at vacumn line but no difference.After plugs are dried off it almost starts til U crank it over a bit then sounds like it's flooded.Take plugs out & they're soaked with
...sensor, fuel filter or vaccum problem It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not cranking anymore or if ...
crank sensor replaced and is getting fuel died on the way home from the shop and now will not start It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare
...Sensor Data Incorrect but Valid DTC B3031 Security System Controller in Learn Mode DTC B3033 Security System Indicates Tamper Or you can try this 30 Minute Procedure Ensure that the battery is fully ...
...crank shaft position sensor. Had sensor changed be still have problem. New battery start checked OK. also have secondary air pump code but was told that would not cause problem? help sounds like the ...
...sensor could be faulty. It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not cranking anymore or if it cranks it ...
...replace the key and the cylender worked everytime for me and it runs about 125.00 if you do the work your self Got a 1991 Grand Am that had the same problem and i just fixed it yesterday. ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
