Questions & Answers for: Acura TL replace the check engine light bulb

Ad

Question about 2002 3.2TL

2 Answers

...check the brake bulbs again. This usually means your brake pads are worn and need to be replaced. The brake light on the dash will only come on when the brake fluid level is low or the parking brake ...

Ad

...replace the HID bulb. How hard can it be? Any suggestions on how to DIY? HID Bulb Replacement A transient high tension (25,000 V ) occurs at the bulb sockets of the high intensity discharge (HID) ...

Ad

...light ds2 and still not working tried different balast (?) still not working?? make sure that the bulb you are using is a 9005 ive seen people instal the wrong bulb and it doesnt work. Same plug ...

Question about 2000 TL

1 Answer

...two problems... 1. The Bulb is blown and needs replacement... you can usually use a key to remove the light cover to expose the bulb. 2. You have a blown fuse locate your fusebox and locate dead

...light on 2003 Acura TL? The lights work fine, just the indicator that tells you they are on does not work. Thanks. the tiny bulb that lights up the switch is burnt out, the bulb is supposed top last ...

Question about 2003 3.2TL

1 Answer

...replace the fog light? Do you need to replace the whole light assembly, or just the bulb? If it the bulb, The lens cover will be screwed on. Remove the screws, pull or twist the old bulb out, and ...

...light on the engine side and you should find a collar assembly with wires running into it. If you twist that collar off and then pull back toward the rear of the vehicle, pull the collar back not the ...

Question about 2004 TL

1 Answer

...and it still doesnt work. I checked and it has power up to the ballast. Should i change the light its self or just the wiring from the ballast to the bulb? Be sure to check the ground side

Question about 1997 TL Series

1 Answer

...on engine off the check engine light does not come on is the bulb replaceable? Check the fuse first then the light bulb, to replace the light bulb requires the instrument cluster be

...canister, valves, or components. (gas cap excluded because you say you replaced it) Some or all of the above could be the source of the check engine light problem. Just replace the evap purge

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

413 Questions

1999 Acura TL
1999 Acura TL

404 Questions

2004 Acura TL
2004 Acura TL

348 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

268 Questions

Manuals & User Guides

Loading...